As number 2, use the right side arrows, press one of the arrows to set the desired leave time and it will start heating up 2 hours before that.
Duffelbach on
To set the time of departure:
1.Press the arrow button once, the clock now changes to the set time of departure
2. You can now change the set time of departure by pressing the arrows
3. When the time of departure has been set, the screen returns to the normal state that shows a clock.
To change the clock to the correct time:
1. Press both arrows at the same time, the numbers start blinking.
2. Adjust the clock by pressing the arrows
3. When the wanted time has been set, the screen will stop blinking after a few seconds and the correct time is now set to the clock.
girafi1551 on
So first you have to set current time with pressing two buttons at the same time, numbers should start blinking and set the time with arrows. When that is done you set the time you wish to leave with arrow buttons. It then starts to pre heat your car two hours before that time you set.
Leave A Reply
Du musst angemeldet sein, um einen Kommentar abzugeben.
6 Kommentare
I dont think you need to pre heat your car in this weather kek.
Instructions look pretty clear to me.
Use Google Translator on your phone.
Use the buttons located on your side.
https://preview.redd.it/gwu1zi39273d1.png?width=720&format=pjpg&auto=webp&s=baddf059ef03014aa59f65e3043c08436bc2c96b
As number 2, use the right side arrows, press one of the arrows to set the desired leave time and it will start heating up 2 hours before that.
To set the time of departure:
1.Press the arrow button once, the clock now changes to the set time of departure
2. You can now change the set time of departure by pressing the arrows
3. When the time of departure has been set, the screen returns to the normal state that shows a clock.
To change the clock to the correct time:
1. Press both arrows at the same time, the numbers start blinking.
2. Adjust the clock by pressing the arrows
3. When the wanted time has been set, the screen will stop blinking after a few seconds and the correct time is now set to the clock.
So first you have to set current time with pressing two buttons at the same time, numbers should start blinking and set the time with arrows. When that is done you set the time you wish to leave with arrow buttons. It then starts to pre heat your car two hours before that time you set.