


Hallo zusammen,
Ich bin gerade ein bisschen am Verzweifeln, deshalb wollte ich mal nachschauen, da ich nicht weiß, wann ich eine Antwort von meinem Vermieter bekommen kann. Die Sache ist also, dass sich mein Boden heute plötzlich erwärmt hat. Deshalb habe ich die Ventile usw. überprüft, da alle Thermostate auf Aus-Position eingestellt sind. Aber drinnen war es extrem heiß. Dann habe ich beschlossen, die Ventile in die Auto-Position zu drehen, wie auf dem Bild zu sehen ist. Ich habe auch angehängt, wie es aussieht, wenn eines davon geöffnet ist.) Es gibt nur zwei Optionen, offen und automatisch. Ich bin mir nicht sicher, was sie darstellen. Open ist ganz klar, aber was ist Auto? Und wenn es geöffnet ist, höre ich sofort, wie etwas Wasser in den Rohren fließt. Aber warum war es im geöffneten Zustand so heiß, obwohl die Thermostate ausgeschaltet waren? Momentan sitze ich in Unterwäsche und das Fenster ist offen, so heiß ist es. Seitdem ich ihn auf die automatische Position gestellt habe, ist der Boden nicht mehr so heiß wie zuvor. Aber trotzdem… Weiß jemand, was all diese Dinge bedeuten? Tut mir leid, ich flippe aus mehreren Gründen wirklich aus, die ich der Länge dieses Beitrags wegen nicht erklären kann, und ich bin nicht an Zentralheizung, Fußbodenheizung und Heizsysteme in deutschen Wohnungen gewöhnt. Ich weiß nichts.
https://www.reddit.com/gallery/1o0qcmv
Von sthweird
3 Kommentare
There should be thermostats in each room.
Check to which temperature they are set. I expect they are still set high from last winter. This should be the explanation.
In the attached picture the valves are all closed.
Leave them on Auto. If they open again (in Auto) you will be able to see the top raised like in the Manuel setting
PS: the other pictures now just loaded.
The thermostat is in the correct setting (so heating should stay off).
PPS: leave the valves in Auto. That’s the correct setting
In the first pic left side there is a valve, you can manually close it and it will stop water from flowing and heating. But it will be temporary until you solve the problem. Might be faulty thermostat.
Your valve motor seems to be this one: [https://produktdaten.strawa.com/product-media/file/ca4e061baa22967083e006c26166915ddf3fc5cb63e9cebf9d8400d242c57feb/65b12ec03baf1_55-00507x_IS.pdf](https://produktdaten.strawa.com/product-media/file/ca4e061baa22967083e006c26166915ddf3fc5cb63e9cebf9d8400d242c57feb/65b12ec03baf1_55-00507x_IS.pdf)
Normally there should be thermostats in every room that are controlling those valves depending on what temperature you selected and how warm it is in that room. This is what the „auto“ setting is for.
The „open“ setting is just a manual override for this (open = water can flow through the valve). If a motor is set to this, the valve should open no matter what the thermostat does, and the room should heat up.
So the right setting would be to set them all to „auto“.