Close Menu
    Finnland

    Blockheizung Nr


    Ich hatte gehofft, dass mir jemand sagen könnte, wie dieser Timer funktioniert? Es gelingt mir scheinbar nicht, die Kabine zum richtigen Zeitpunkt aufzuwärmen.

    https://i.redd.it/u34n0hbweggg1.jpeg

    Von Enough-Win4216

    View 7 Comments

    7 Kommentare

    1. Tiitana on

      Turn the inner dial clockwise to real time and then push the outer dial and turn the other way to set when it is on. it starts at green and ends at red arrow

    2. Muuankissa on

      So you turn the whole thing (black and white circles) clockwise until the white notch is on the current time. Then you push it down and move the black ring counterclockwise until you hit the time you want. It starts heating at the green time and stops at the red. You can move the black to the current time to check it heats. In the photo you appear to have the time at 21 and heating from 10 to 12.

    3. MrIzzard on

      To set heating time: push the outer rim down and turn counterclockwise to set the desired heating time

      To set time: turn the whole clock clockwise without pushing to desired time

      To test: move the clock towards the set heating time. When you reach the heating time, that tiny grey indikator should pop to „1“. If not, try to turn another round and try again. Also check the fuse.

    4. hanslankari78 on

      First set the clock to correct time by turning the black circle clockwise Then set the time you want to leave by pushing the same black circle down and turning counterclockwise to set the red arrow to the desired leaving time. Then there will be electricity available for two hours before leaving time as the green arrow shows.

    5. Liukka123 on

      -Set the current time: Turn the black ring clockwise until the clock shows the correct time.

      -Set the desired departure time (red arrow): Press the black ring down and at the same time turn it counter-clockwise until the red arrow points to the departure time you want.

    6. Liima89 on

      You rotate the wheel clockwise to set the clock, white triangle on upper left points at the „current time.“ To set the „heating time“, you press down the black wheel, and rotate it counter clockwise. The green triangle show the start, and the red triangle points at the end of the heating.

      Set the clock to right time, set the red triangle at the time you want to use your car, wait, and enjoy a heated car.

    7. kumikanki on

      Arrow in the inner ring should be at the current time and you twist the whole thing to set it. Then you gently push the outer (black) and twist it to the opposite direction to set your leaving time.

      Green arrow means the time when the heater starts and the red when it finishes.

    Leave A Reply